TJA1044GT 产品信息|NXP

TJA1044GT

正常供应

TJA1044GT

正常供应

购买选项

工作特点

参数
Recommended Orderable Part Number
TJA1044GT/1Z, TJA1044GT/3Z
New Generation Recommendation
TJA1044BT
MCU I/O Interface (V)
3.3, 5.0
VIO Option Available
Y
Low Power Modes
Standby Mode
Data Rate [max] kbps
5000.0
CAN Channels
1
Product Category
CAN FD / High-Speed CAN
Supply Voltage [Min to Max] (V)
4.5 to 5.5
Data Rate [min] kbps
40.0
Voltage on bus pins [Min-Max] (V)
-42 to 42
参数
VESD IEC on bus pins (+/- kV)
-8 to 8
VESD HBM on bus pins (+/- kV)
-8 to 8
Junction Temperature (Max) (℃)
150
Protection
TXD dominant timeout, overtemperature detection, undervoltage detection
Wake-Up Pin
N
Min High Input Levels (V) [Vio]
2
GPIO
0
Supported standards
ISO-11898-2:2016, SAE J1939-14, SAE J2284-1, SAE J2284-2, SAE J2284-3, SAE J2284-4, SAE J2284-5
SPLIT Pin
N
Thermal Resistance (Spec) (℃/W)
97
Product Application
Automotive, Industrial

环境

部件/12NC无铅欧盟 RoHS无卤素RHF指标REACH SVHC重量(mg)
TJA1044GT/1Z(935307179431)
Yes
Yes
Certificate Of Analysis (CoA)
Yes
DREACH SVHC
72.15620765439999
TJA1044GT/3Z(935308744431)
Yes
Yes
Certificate Of Analysis (CoA)
Yes
DREACH SVHC
72.2533776304
TJA1044GTJ(935301676118)
Yes
Yes
Certificate Of Analysis (CoA)
Yes
DREACH SVHC
72.15620765439999

质量

部件/12NC安全保障功能安全湿度灵敏度等级(MSL)封装体峰值温度(PPT)(C°)
铅焊接无铅焊接铅焊接无铅焊接
TJA1044GT/1Z
(935307179431)
Quality Managed
1
1
240
260
TJA1044GT/3Z
(935308744431)
Quality Managed
1
1
240
260
TJA1044GTJ
(935301676118)
Quality Managed
1
1
240
260

配送

部件/12NC协调关税 (美国)免责声明
TJA1044GT/1Z
(935307179431)
854239
TJA1044GT/3Z
(935308744431)
854239
TJA1044GTJ
(935301676118)
854239

更多信息 TJA1044

The TJA1044 is part of the Mantis family of high-speed CAN transceivers. It provides an interface between a controller area network (CAN) protocol controller and the physical two-wire CAN bus. The transceiver is designed for high-speed CAN applications in the automotive industry, providing the differential transmit and receive capability to (a microcontroller with) a CAN protocol controller. Ideal passive behavior to the CAN bus when the supply voltage is off.

A very low-current Standby mode with bus wake-up capability Excellent EMC performance, even without a common mode choke. Variants with a VIO pin can be interfaced directly with microcontrollers with supply voltages from 3.3 V to 5 V

These features make the TJA1044 an excellent choice for all types of HS-CAN networks, in nodes that require a low-power mode with wake-up capability via the CAN bus.

The TJA1044 implements the CAN physical layer as defined in the current 11898-2:2016 and SAE J2284-1 to SAE J2284-5. The TJA1044T is specified for data rates up to 1 Mbit/s. Additional timing parameters defining loop delay symmetry are specified for the other variants. This implementation enables reliable communication in the CAN FD fast phase at data rates up to 5 Mbit/s.

更多