Features
Battery Cell Controller, Advanced, 6 Channels, TPL, LQFP48.
Package
HLQFP48 LQFP64, plastic, low profile quad flat package; 64 terminals; 0.5 mm pitch; 10 mm x 10 mm x 1.4 mm body.
封装
HVSON14: plastic, thermal enhanced very thin small outline package; no leads; 14 terminals, 0.65 mm pitch, 4.5 mm x 3 mm x 0.85 mm body
购买选项
UJA1164TK,118
使用寿命终止
12NC: 935294616118
详细信息
订购
工作特点
| 参数 | 值 |
|---|---|
Category | SBC; CAN |
Supported standards | ISO-11898-2; ISO-11898-5; ISO-11898-6 |
Low power modes | Standby Mode |
Supply voltage [min] (V) | 3 |
Supply voltage [max] (V) | 40 |
Data rate [max] (kb/s) | 2000 |
CAN channels | 1 |
LIN channels | 0 |
Voltage on bus pins [min] | -58 |
Voltage on bus pins [max] | 58 |
| 参数 | 值 |
|---|---|
VIO option available | No |
Recommended Version | 100mA |
Rth(j-a) (K/W) | 60 |
SPLIT pin | No |
Under-voltage detection | Yes |
TX Dominant Time out | Yes |
Over-temperature detection | Yes |
INH / Wake Pin | No |
Min High Input Levels (V) | 0.75 x Vv1 |
环境
| 部件/12NC | 无铅 | 欧盟 RoHS | 无卤素 | RHF指标 | REACH SVHC | 重量（mg） |
|---|---|---|---|---|---|---|
UJA1164TK,118(935294616118) | Yes | Yes Certificate Of Analysis (CoA) | Yes |  | REACH SVHC | 39.9438390816 |
质量
| 部件/12NC | 安全保障功能安全 | 湿度灵敏度等级(MSL) | 封装体峰值温度（PPT）（C°） | ||
|---|---|---|---|---|---|
| 铅焊接 | 无铅焊接 | 铅焊接 | 无铅焊接 | ||
UJA1164TK,118 (935294616118) | Quality Managed | 1 | 1 | 240 | 260 |
配送
| 部件/12NC | 协调关税 (美国)免责声明 |
|---|---|
UJA1164TK,118 (935294616118) | 854239 |
更多信息 UJA1164TK
This part is not recommended for new designs. For new designs, we recommend UJA1164ATK.
The UJA1164 is a mini high-speed CAN System Basis Chip (SBC) containing an ISO 11898-2/5 compliant HS-CAN transceiver and an integrated 5 V/100 mA supply for a microcontroller. It also features a watchdog and a Serial Peripheral Interface (SPI). The UJA1164 can be operated in a very low-current Standby mode with bus wake-up capability and supports ISO 11898-6 compliant autonomous CAN biasing.
The UJA1164 implements the standard CAN physical layer as defined in the current ISO11898 standard (-2 and -5). Pending the release of the updated version of ISO11898 including CAN FD, additional timing parameters defining loop delay symmetry are included. This implementation enables reliable communication in the CAN FD fast phase at data rates up to 2 Mbit/s.
A number of configuration settings are stored in non-volatile memory, allowing the SBC to be adapted for use in a specific application. This makes it possible to configure the power-on behavior of the UJA1164 to meet the requirements of different applications.