1
Get Started2
Get to know the hardware3
Configure hardware4
Install software5
Learn moreThe NXP analog product development boards provide an easy-to-use platform for evaluating NXP products. The boards support a range of analog, mixed-signal and power solutions. They incorporate monolithic integrated circuits and system-in-package devices that use proven high-volume technology. NXP products offer longer battery life, a smaller form factor, reduced component counts, lower cost and improved performance in powering state-of-the-art systems.
This page will guide you through learning about how to set up the KITPF8200FRDMPGM programming board.
Working with the KITPF8200FRDMPGM requires the kit contents, additional hardware and a Windows PC workstation with installed software.
Kit contents
Something went wrong! Please try again.
This programming board requires a Windows PC workstation with the following specifications:
Something went wrong! Please try again.
Installing software is necessary to work with this evaluation board. Software package NXP_FlexGUI_PF8x_Rev_0.7.x or higher contains:
Something went wrong! Please try again.
Refer to UM11162: KITPF8200FRDMPGM programming Board - User Guide for full evaluation board functionality.
Something went wrong! Please try again.
The KITPF8200FRDMPGM programming board provides an easy-to-use platform for programming NXP products. The NXP OTP programming boards provide an easy-to-use platform for programming the default configuration of the NXP PF81/82 power management products. The boards support all voltages and signals needed for OTP programming.
The KITPF8200FRDMPGM is a programming board that provides the user with information to program the PF81/82 multi-channel power management integrated circuit.
Something went wrong! Please try again.
Programming socket
System features
Attached FRDM_KL25Z
Something went wrong! Please try again.
The KITPF8200FRDMPGM consists of a multiple board with FRDM-LKL25 as shown in the final assembly below.
Something went wrong! Please try again.
Board overview / components, jumper configurations, test points, connectors and additional board descriptions / images are available in the User Guide. Refer to UM11162: KITPF8200FRDMPGM programming Board - User Guide
Something went wrong! Please try again.
This section summarizes the overall setup. Detail description is provided in the user guide.
Suggested equipment’s needed for test:
Something went wrong! Please try again.
Something went wrong! Please try again.
It is recommended to learn about the devices and their specifications prior to operating the boards. The device has a high level of flexibility due to parameter configuration available in the OTP. This impacts the functionality of the device. It is key to understand how the parameters are programmed on each device.
Note: The board is populated with a Programming socket - Clamshell 56-pin QFN socket.
Something went wrong! Please try again.
To configure the hardware and workstation as illustrated.
Something went wrong! Please try again.
Something went wrong! Please try again.
Detailed configuration, Flex GUI options are detailed in the User Guide. Refer to UM11162: KITPF8200FRDMPGM programming Board - User Guide
Something went wrong! Please try again.
Download and run SW for the KITPF8200FRDMPGM programming board. These evaluation boards use FlexGUI software for PF8100/PF8200 device. Prior to the installation of the FlexGUI software and performing device firmware updates (if needed), download and unzip the NXP_FlexGUI_PF8x_REV_0.7.x.zip file to any desired location.
Something went wrong! Please try again.
Something went wrong! Please try again.
The FlexGUI software installation requires only extracting the zip file in a desired location.
Something went wrong! Please try again.
The FRDM-KL25Z freedom board is used as a communication bridge to interface the FlexGUI with the PMIC and other I2C devices. The firmware is organized in three levels:
Note: The following firmware updates are optional and can be skipped if the firmware is up-to-date.
Something went wrong! Please try again.
Something went wrong! Please try again.
If a new software or silicon release requires a firmware update on the FRDM-KL25Z freedom board, use the following procedure to upgrade or downgrade the firmware of the freedom board as needed. Note that this procedure is needed only to update the firmware and may be skipped if no change is needed.
Something went wrong! Please try again.
Complete step by step software instructions is detailed in the User Guide. Refer to UM11162: KITPF8200FRDMPGM programming Board - User Guide
Something went wrong! Please try again.
Now start embedded application development.
Something went wrong! Please try again.
Something went wrong! Please try again.
The tool summary page for KITPF8200FRDMPGM is at https://www.nxp.com/KITPF8200FRDMPGM.
The page provides overview information, technical and functional specifications, ordering information, documentation and software. The Get Started provides quick-reference information applicable to using the KITPF8200FRDMPGM programming board, including the downloadable assets.
Something went wrong! Please try again.
Hardware pages:
Software pages:
Community page
Something went wrong! Please try again.
KITPF8200FRDMPGM: programming board featuring the PF8200 PMIC for high performance (ASIL B) applications
BuySomething went wrong! Please try again.
Board Overview
KITPF8200FRDMPGM programming board features
Board Image
Additional board support
Configure the hardware
Configuration image
Device Considerations
Setting up the board
Generating OTP configuration
Additional board support