Features
Battery Cell Controller, Advanced, 6 Channels, TPL, LQFP48.
Package
HLQFP48 LQFP64, plastic, low profile quad flat package; 64 terminals; 0.5 mm pitch; 10 mm x 10 mm x 1.4 mm body.
封装
TSSOP24: plastic, thin shrink small outline package; 24 leads; 0.65 mm pitch; 7.8 mm x 4.4 mm x 1.1 mm body
购买选项
PCA9701PW,118
正常供应
12NC: 935283619118
详细信息
数量
单价
| 1 - 24 | $0.99 |
| 25 - 99 | $0.99 |
| 100+ | $0.99 |
订购
现货:1,870
从分销商处购买PCA9701PW,112
停产
12NC: 935283619112
详细信息
订购
PCA9701PW/Q900,118
停产
12NC: 935289799118
详细信息
订购
工作特点
| 参数 | 值 |
|---|---|
Number of bits | 16 |
Supply Voltage [Min to Max] (V) | 2.3 to 5.5 |
Interfaces | SPI |
Operating Temperature (Min-Max) (℃) | -40 to 125 |
| 参数 | 值 |
|---|---|
Output Mode | input only |
Interrupt | N |
Reset input pin | N |
Frequency (Max) (kHz) | 5000 |
环境
| 部件/12NC | 无铅 | 欧盟 RoHS | 无卤素 | RHF指标 | REACH SVHC | 重量（mg） |
|---|---|---|---|---|---|---|
PCA9701PW,112(935283619112) | Yes | Yes | Yes |  | REACH SVHC | 180.84402588000003 |
PCA9701PW,118(935283619118) | Yes | Yes Certificate Of Analysis (CoA) | Yes | | REACH SVHC | 86.36565954499999 |
PCA9701PW/Q900,118(935289799118) | Yes | Yes | No |  | REACH SVHC | 0.1 |
质量
| 部件/12NC | 安全保障功能安全 | 湿度灵敏度等级(MSL) | 封装体峰值温度（PPT）（C°） | 适合 | MTBF | IR | ||
|---|---|---|---|---|---|---|---|---|
| 铅焊接 | 无铅焊接 | 铅焊接 | 无铅焊接 | |||||
PCA9701PW,112 (935283619112) | No | 1 | 1 | 240 | 260 | 2.0 | 5.0E8 | 0.0 |
PCA9701PW,118 (935283619118) | No | 1 | 1 | 240 | 260 | 2.0 | 5.0E8 | 0.0 |
PCA9701PW/Q900,118 (935289799118) | No | 1 | 1 | 240 | 260 | 2.0 | 5.0E8 | 0.0 |
配送
| 部件/12NC | 协调关税 (美国)免责声明 |
|---|---|
PCA9701PW,112 (935283619112) | 854239 |
PCA9701PW,118 (935283619118) | 854239 |
PCA9701PW/Q900,118 (935289799118) | 854239 |
停产和更换部件数据
| 部件/12NC | 停产通知 | 上次购买日期 | 上次发货日期 | 替代器件 |
|---|---|---|---|---|
PCA9701PW,112 (935283619112) | - | 2018-01-24 | 2018-07-24 | PCA9701PW,118 (935283619118) |
更多信息 PCA9701_PCA9702
The PCA9701/PCA9702 are low power 18 V tolerant SPI General Purpose Input (GPI) shift register designed to monitor the status of switch inputs. It generates an interrupt when one or more of the switch inputs change state. The input level is recognized as a HIGH when it is greater than 0.7 x VDD and as a LOW when it is less than 0.4 x VDD (minimum threshold of 2 V at 5 V node). The PCA9701 can monitor up to 16 switch inputs and the PCA9702 can monitor up to 8 switch inputs.
The falling edge of the CS pin samples the input port status and clears the interrupt. When CS is LOW, the rising edge of the SCLK loads the shift register and shifts the value out of the shift register. The serial input is sampled on the falling edge of SCLK.
Each of the input ports has a 18 V breakdown ESD protection circuit. When used with a series resistor (minimum 100 kΩ), the input can connect to a 12 V battery and support double battery, reverse battery, 27 V jump start and 40 V load dump conditions in automotive applications. Higher voltages can be tolerated on the inputs depending on the series resistor used to limit the input current.
With both the high breakdown voltage and high ESD, these devices are useful for both automotive and mobile applications.
The PCA9703/PCA9704 are new pin compatible devices for the PCA9701/PCA9702 which have an interrupt masking feature allowing selected inputs to not generate interrupts and provides higher ground offset of 0.55 x VDD (minimum of 2.5 V at 5 V node) with minimum hysteresis of 0.05 x VDD (minimum of 225 mV at 5 V node).