ZigBee and IEEE802.15.4 Wireless Microcontroller with 160 KB Flash, 32 KB RAM
Note: JN5189/88T is preferred for any new new Zigbee®, Thread design. No new software releases planned
The JN5164 is an ultra low power, high performance wireless microcontroller supporting RF4CE and IEEE802.15.4 networking stacks to facilitate the development of Home Automation, Smart Lighting, remote control or wireless sensor applications. It features an enhanced 32-bit RISC processor with 160 kB embedded Flash, 32 kB RAM and 4 kB EEPROM memory, offering high coding efficiency through variable width instructions, a multi-stage instruction pipeline and low power operation with programmable clock speeds. It also includes a 2.4 GHz IEEE802.15.4 compliant transceiver and a comprehensive mix of analogue and digital peripherals. The very low operating current of 15 mA, with a 0.6 μA sleep timer mode, gives excellent battery life allowing operation direct from a coin cell.
The peripherals support a wide range of applications. They include a 2-wire I2C, and SPI ports which can operate as either leader or follower, a four channel ADC with battery and a temperature sensor. It can support a large switch matrix of up to 100 elements, or alternatively a 20 key capacitive touch pad.
For support documentation, please here.
Outline 3d SOT618-7
产品详情
Features
Radio
- 2.4 GHz IEEE802.15.4 compliant
- 128-bit AES security processor
- MAC accelerator with packet formatting, CRCs, address check, auto-acks, timers
- Integrated ultra low power sleep oscillator - 0.6 μA
- 2.0 V to 3.6 V battery operation
- Deep sleep current 0.12 μA (Wake-up from IO)
- < $0.15 external component cost
- RX current 17 mA , TX 15 mA
- Receiver sensitivity -95 dBm
- Transmit power 2.5 dBm
- Time of Flight engine for ranging
- Antenna Diversity (Auto RX)
Microcontroller
- 32-bit RISC CPU, 1 to 32 MHz clock speed
- Variable instruction width for high coding efficiency
- Multi-stage instruction pipeline
- JN5161: 64kB/8kB/4kB (Flash/RAM/EEPROM)
- JN5164: 160kB/32kB/4kB (Flash/RAM/EEPROM)
- JN5168: 256kB/32kB/4kB (Flash/RAM/EEPROM)
- Data EEPROM with guaranteed 100k write operations
- RF4CE, ZigBee SE and ZigBee Light Link stacks
- 2-wire I²C compatible serial interface. Can operate as either controller or target
- 5 x PWM (4x timer and 1 timer/counter)
- 2 low power sleep counters
- 2 x UART
- SPI Leader and Follower port, 3 selects
- Supply voltage monitor with 8 programmable thresholds
- 4-input 10-bit ADC, comparator
- Battery and temperature sensors
- Watchdog and Brown Out Reset
- Up to 20 Digital IO Pins (DIO)
- Infra-red remote control transmitter
- Temperature range (-40 °C to +125 °C) 6 x 6 mm 40-lead
- Lead-free and RoHS compliant
Target Applications
- Robust and secure low power wireless applications
- RF4CE Remote Controls
- ZigBee SE networks
- ZigBee Light Link networks
- Lighting and Home automation
- Toys and gaming peripherals
- Smart Energy
- Energy harvesting, for example self powered light switch
Target Applications
- Home Automation devices
- Home Security devices
- Smart Lighting devices
- Smart Energy devices
- Energy Harvesting devices
- Toys and gaming peripherals
购买/参数
|
|
|
|
|
|
|
|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
文档
快速参考恩智浦 文档类别.
设计资源
软件
快速参考恩智浦 软件类型.
5 软件文件
-
BSP及设备驱动
Zigbee Smart Energy SDK
-
BSP及设备驱动
Zigbee Remote Control (RF4CE)
-
BSP及设备驱动
Zigbee Light Link SDK
-
BSP及设备驱动
Zigbee Home Automation SDK
-
BSP及设备驱动
Zigbee 3.0 SDK
注意: 推荐在电脑端下载软件，体验更佳。
工程服务
如需恩智浦直接支持，请参阅 工程服务.
1 工程服务
-
独立设计公司(IDH)
Embedded Software Development Services
要查找支持该产品的其他合作伙伴产品，请访问我们的 合作伙伴市场.