Layerscape® Access LA9310可编程基带处理器
RF112L0H Transceiver
The RF112L0H Transceiver is a direct baseband to RF (“zero-IF”) transceiver supporting the 2.4GHz and 5GHz Industrial, Medical and Scientific (IMS) bands. It includes: one dual-band 1Tx/2Rx MIMO transceiver, one dual-band observation receiver, and one high-band (only) observation receiver. Higher antenna counts are supported by instantiating multiple devices on a board.
The RF112L0H supports 20, 40 and 80MHz channel bandwidths, baseband I/Q filters and an analog interface to a baseband IC that integrates ADC/DAC functionality. It is compliant to spectral mask requirements. Included is an Automatic Gain Control (AGC) interface with proprietary signaling to NXP baseband devices, integrated clock synthesizer (RF frequency generator), calibration capabilities and an auxiliary ADC for temperature measurements or similar functions. The device is digitally controlled through I2C.
The RF112L0H is very low-power and packaged in a cost-optimized 64-pin QFN form-factor.
产品详情
Features
- RF Configuration
- Support for 2.4GHz (2.4-2.5GHz) and 5GHz (4.9-6GHz) ISM bands
- 20, 40, 80MHz channel bandwidth, ISM spectral mask compliant
- 1T 2R MIMO – higher Tx/Rx counts with multi-device operation
- Direct conversion transceiver
- Additional dual band observation receiver and dedicated high-band receiver
- Integrated second LO for use in I/Q calibration
- Baseband Interface
- Baseband analog I/Q interface
- I2C interface for configuration and control
- Easy configuration and programming
- Additional features
- Integrated clock synthesizer
- Integrated fast AGC interface with proprietary LVDS signaling (LLCP)
- Integrated RSSI detectors
部件编号包含： RF112L0HS9B, RF112L0HX9B.
相关产品
Layerscape®Access LA12xx可编程基带处理器