Features
Battery Cell Controller, Advanced, 6 Channels, TPL, LQFP48.
Package
HLQFP48 LQFP64, plastic, low profile quad flat package; 64 terminals; 0.5 mm pitch; 10 mm x 10 mm x 1.4 mm body.
购买选项
SE98ATP,547
正常供应
12NC: 935288794547
详细信息
数量
单价
| 1 - 24 | $0.82 |
| 25 - 99 | $0.82 |
| 100+ | $0.82 |
订购
现货:4,000
从分销商处购买SE98ATP,147
停产
12NC: 935288794147
详细信息
订购
工作特点
| 参数 | 值 |
|---|---|
Standby current [typ] (µA) | 5 |
Operating Temperature (°C) | -20~125 |
Accuracy on-chip (±°C) | 2@-75~95?3@40~125 |
| 参数 | 值 |
|---|---|
Operating voltage (VDC) | 3.0~3.6 |
Assignable addresses | 8 |
I2C/SMBus clock (kHz) | 400 |
环境
| 部件/12NC | 无铅 | 欧盟 RoHS | 无卤素 | RHF指标 | REACH SVHC | 重量（mg） |
|---|---|---|---|---|---|---|
SE98ATP,147(935288794147) | Yes | Yes | Yes |  | REACH SVHC | 9.44 |
SE98ATP,547(935288794547) | Yes | Yes Certificate Of Analysis (CoA) | Yes | | REACH SVHC | 13.206 |
质量
| 部件/12NC | 安全保障功能安全 | 湿度灵敏度等级(MSL) | 封装体峰值温度（PPT）（C°） | 适合 | MTBF | IR | ||
|---|---|---|---|---|---|---|---|---|
| 铅焊接 | 无铅焊接 | 铅焊接 | 无铅焊接 | |||||
SE98ATP,147 (935288794147) | - | 1 | 1 | 240 | 260 | 2.0 | 5.0E8 | 0.0 |
SE98ATP,547 (935288794547) | No | 3 | 3 | 240 | 260 | 2.0 | 5.0E8 | 0.0 |
配送
| 部件/12NC | 协调关税 (美国)免责声明 |
|---|---|
SE98ATP,147 (935288794147) | 854239 |
SE98ATP,547 (935288794547) | 854239 |
停产和更换部件数据
| 部件/12NC | 停产通知 | 替代器件 |
|---|---|---|
SE98ATP,147 (935288794147) | - | SE98ATP,547 (935288794547) |
产品变更通知
| 部件/12NC | 发行日期 | 生效日期 | 产品更改通知 | 标题 |
|---|---|---|---|---|
SE98ATP,547 (935288794547) | 2020-12-15 | 2020-12-16 | 202011011I | NXP Will Add a Sealed Date to the Product Label |
更多信息 SE98A
The NXP Semiconductors SE98A measures temperature from -40 ºC and +125 ºC with JEDEC Grade B ±1 ºC accuracy between +75 ºC and +95 ºC communicating via the I2C-bus/SMBus. It is typically mounted on a Dual In-Line Memory Module (DIMM) measuring the DRAM temperature in accordance with the new JEDEC (JC-42.4) Mobile Platform Memory Module Thermal Sensor Componentspecification.
The SE98A thermal sensor operates over the VDD range of 1.7 V to 3.6 V. The SE98A does not include the 2 k SPD and is designed for custom DIMM where larger SPD is required.
The Temp Sensor (TS) consists of an Analog-to-Digital Converter (ADC) that monitors and updates its own temperature readings 8 times per second, converts the reading to a digital data, and latches them into the data temperature registers. User-programmable registers, such as Shutdown or Low-power modes and the specification of temperature event and critical output boundaries, provide flexibility for DIMM temperature-sensing applications.
When the temperature changes beyond the specified boundary limits, the SE98A outputs an EVENT signal using an open-drain output that can be pulled up between 0.9 V and 3.6 V. The user has the option of setting the EVENT output signal polarity as either an active LOW or active HIGH comparator output for thermostat operation, or as a temperature event interrupt output for microprocessor-based systems. The EVENT output can even be configured as a critical temperature output.
The SE98A supports the industry-standard 2-wire 2-bus/SMBus serial interface. The SMBus TIMEOUT function is supported to prevent system lock-ups. Manufacturer and Device ID registers provide the ability to confirm the identify of the device. Three address pins allow up to eight devices to be controlled on a single bus.
The SE98A is an improved SE98 and is comparable to the thermal sensor in the SE97 but with voltage range of 1.7 V to 3.6 V.