Features
Battery Cell Controller, Advanced, 6 Channels, TPL, LQFP48.
Package
HLQFP48 LQFP64, plastic, low profile quad flat package; 64 terminals; 0.5 mm pitch; 10 mm x 10 mm x 1.4 mm body.
购买选项
PCA9600D,112
正常供应
12NC: 935285243112
详细信息
订购
PCA9600D,118
正常供应
12NC: 935285243118
详细信息
数量
单价
| 1 - 24 | $2.35 |
| 25 - 99 | $2.35 |
| 100+ | $2.35 |
订购
现货:2,425
从分销商处购买工作特点
| 参数 | 值 |
|---|---|
Inputs | 1 |
Outputs | 1 |
Type Of Offset | Static Offset |
| 参数 | 值 |
|---|---|
Supply Voltage [Min to Max] (V) | 2.5 to 15 |
Frequency (Max) (MHz) | 1 |
Operating Temperature (Min-Max) (℃) | -40 to 85 |
环境
| 部件/12NC | 无铅 | 欧盟 RoHS | 无卤素 | RHF指标 | REACH SVHC | 重量（mg） |
|---|---|---|---|---|---|---|
PCA9600D,112(935285243112) | Yes | Yes Certificate Of Analysis (CoA) | Yes |  | REACH SVHC | 68.59900000000002 |
PCA9600D,118(935285243118) | Yes | Yes Certificate Of Analysis (CoA) | Yes | | REACH SVHC | 68.59900000000002 |
质量
| 部件/12NC | 安全保障功能安全 | 湿度灵敏度等级(MSL) | 封装体峰值温度（PPT）（C°） | 适合 | MTBF | IR | ||
|---|---|---|---|---|---|---|---|---|
| 铅焊接 | 无铅焊接 | 铅焊接 | 无铅焊接 | |||||
PCA9600D,112 (935285243112) | No | 1 | 1 | 240 | 260 | 2.0 | 46045.0 | 0.0 |
PCA9600D,118 (935285243118) | No | 1 | 1 | 240 | 260 | 2.0 | 46045.0 | 0.0 |
配送
| 部件/12NC | 协调关税 (美国)免责声明 |
|---|---|
PCA9600D,112 (935285243112) | 854239 |
PCA9600D,118 (935285243118) | 854239 |
更多信息 PCA9600
The PCA9600 is designed to isolate I²C-bus capacitance, allowing long buses to be driven in point-to-point or multipoint applications of up to 4000 pF. The PCA9600 is a higher-speed version of the P82B96. It creates a non-latching, bidirectional, logic interface between a normal I²C-bus and a range of other higher capacitance or different voltage bus configurations. It can operate at speeds up to at least 1 MHz, and the high drive side is compatible with the Fast-mode Plus (Fm+) specifications.
The PCA9600 features temperature-stabilized logic voltage levels at its SX/SY interface making it suitable for interfacing with buses that have non I²C-bus-compliant logic levels such as SMBus, PMBus, or with microprocessors that use those same TTL logic levels.
The separation of the bidirectional I²C-bus signals into unidirectional TX and RX signals enables the SDA and SCL signals to be transmitted via balanced transmission lines (twisted pairs), or with galvanic isolation using opto or magnetic coupling. The TX and RX signals may be connected together to provide a normal bidirectional signal.