Features
Battery Cell Controller, Advanced, 6 Channels, TPL, LQFP48.
Package
HLQFP48 LQFP64, plastic, low profile quad flat package; 64 terminals; 0.5 mm pitch; 10 mm x 10 mm x 1.4 mm body.
封装
WLCSP: wafer level chip-scale package; 12 bumps; 1.36 x 1.66 x 0.51 mm, 0.4 mm pitch (Backside coating included)
购买选项
NX5P3001UKZ
正常供应
12NC: 935302222012
详细信息
订购
现货:2,990
从分销商处购买工作特点
| 参数 | 值 |
|---|---|
Family | NX5 |
Function | bidirectional power switch for combined charger and USB-OTG applications |
VCC (V) | 3.2 - 6.35 |
Logic switching levels | low threshold |
RON (Ohm) | 62 |
| 参数 | 值 |
|---|---|
ISW (A) | 3 |
tON (ms) | 1.5 |
Power dissipation considerations | very low |
Tamb (°C) | -40~85 |
Rth(j-a) (K/W) | 73 |
环境
| 部件/12NC | 无铅 | 欧盟 RoHS | 无卤素 | RHF指标 | REACH SVHC | 重量（mg） |
|---|---|---|---|---|---|---|
NX5P3001UKZ(935302222012) | Yes | Yes Certificate Of Analysis (CoA) | Yes |  | REACH SVHC | 1.524985 |
质量
| 部件/12NC | 安全保障功能安全 | 湿度灵敏度等级(MSL) | |
|---|---|---|---|
| 铅焊接 | 无铅焊接 | ||
NX5P3001UKZ (935302222012) | No | 1 | 1 |
配送
| 部件/12NC | 协调关税 (美国)免责声明 |
|---|---|
NX5P3001UKZ (935302222012) | 854239 |
更多信息 NX5P3001UK
The NX5P3001 is an advanced bidirectional power switch and ESD-protection device for combined USB‑OTG and charger port applications. It includes undervoltage lockout, overvoltage lockout and overtemperature protection circuits designed to automatically isolate the power switch terminals when a fault condition occurs.
The device features two power switch input/output terminals (VBUSI and VBUSO), an open-drain acknowledge output (ACK), an enable input which includes logic level translation (EN) and low capacitance Transient Voltage Suppression (TVS) type ESD‑clamps for USB data and ID pins.
When EN is set HIGH the device enters a low-power mode, disabling all protection circuits. When used in combined charger and USB‑OTG applications the 30 V tolerant VBUSI switch terminal is used as the supply and switch input when charging, for USB‑OTG the VBUSO switch terminal is used as the supply and switch input.
Designed for operation from 3.2 V to 6.35 V, it is used in battery charging and power domain isolation applications to reduce power dissipation and extend battery life.