-
EVSE-SIG-BRD2X
-
EasyEVSE EV Charging Signal Board.
Kit Contains
- EasyEVSE EV Charging Signal Board and power supply
EasyEVSE EV Charging Signal Board
The EVSE-SIG-BRD Signal Board is an add-on for several EV charging development platforms. It hosts an LPC55S36 MCU for the SAE J1772 control pilot, a TJA1021BT LIN transceiver for SAE J3068 and a Lumissil CG5317 HomePlug Green PHY for ISO 15118 communications. It supports the proximity pilot, GFCI, relay drive, Ethernet and CAN PHYs, and is compatible with NXP development boards for i.MX 8, 9, RT1060, RT1064 or S32G-VNP-RDB3.
产品详情
Features
Embedded Microcontroller
- LPC5536/LPC55S36 MCU
- Arm Cortex-M33 with flash and RAM
- PWMs, ADCs and DACs with on-chip comparator
- CAN, Ethernet, UART, SPI and I2C interfaces
HomePlug Green PHY
- Lumissil CG5317 HomePlug Green PHY Transceiver for ISO 15118 power line communication (PLC)
Control Pilot
- J1772 (IEC 61851) PWM, ISO 15118 EVSE and EV support
Proximity Pilot
- J1772 support
Ethernet Switch
- SJA1110B to enable switching between several Ethernet sources
CAN Interface
- TJA1044GT to support CAN communication
LIN Interface
- TJA1021BT LIN transceiver for SAE J3068 to support LIN communication
Ground-Fault Circuit Interrupters (GFCI)
- GFCI detection and relay asynchronous triggering
Relay Driver
- Drive up to two DC coil relays at 12 V and 140 mA
External AFE Interface
- Supports connection with an external Analog-Front-End (AFE)
Safety Check Header
- Supports connection with an external high voltage AC and current sensor circuit
Host Connectors
- Arduino connector for the i.MX RT crossover MCU (MIMXRT1060/1064-EVK) and S32K3 automotive MCU (S32K3X4EVB-T172) development boards
- EXP CN header for the i.MX 9 applications processor (MCIMX93-EVK) development board
- Multi-Function Port (MFP) for the S32G automotive processor (S32G-VNP-RDB3) development board
- Ethernet connectors for 1 x 100BASE-TX and 1 x 100BASE-T1
Tools and OS Support
- Linux OS
- FreeRTOS
- MCUXpresso
购买选项
-
EVSE-IMX93-CBL
-
Cable kit for the EasyEVSE EV Charging Signal Board.
Kit Contains
- Cable harness for the MCIMX93-EVK
-
EVSE-RT106X-CBL
-
Cable kit for the EasyEVSE EV Charging Signal Board.
Kit Contains
- Cable harness for the MIMXRT1060-EVKB and MIMXRT1064-EVK
文档
快速参考恩智浦 文档类别.
