Features
Battery Cell Controller, Advanced, 6 Channels, TPL, LQFP48.
Package
HLQFP48 LQFP64, plastic, low profile quad flat package; 64 terminals; 0.5 mm pitch; 10 mm x 10 mm x 1.4 mm body.
封装
HVSON14: plastic, thermal enhanced very thin small outline package; no leads; 14 terminals, 0.65 mm pitch, 4.5 mm x 3 mm x 0.85 mm body
购买选项
TJA1463ATK/0Z
正常供应
12NC: 935389371431
详细信息
数量
单价
| 1 - 25 | $0.77 |
| 26 - 99 | $0.71 |
| 100+ | $0.65 |
订购
现货:9,966
从分销商处购买工作特点
| 参数 | 值 |
|---|---|
MCU I/O Interface (V) | 3.3, 5.0 |
Low Power Modes | Sleep Mode, Standby Mode |
CAN Channels | 1 |
Product Category | CAN FD, CAN Signal Improvement |
Supply Voltage [Min to Max] (V) | 4.5 to 5.5 |
Input Voltage [Min - Max] (V) | 4.5 to 28 |
Data Rate [max] kbps | 8000.0 |
Voltage on bus pins [Min-Max] (V) | -36 to 40 |
VESD IEC on bus pins (+/- kV) | -6 to 6 |
| 参数 | 值 |
|---|---|
Junction Temperature (Max) (℃) | 150 |
Protection | Gap-Free Operation, TXD dominant timeout, overtemperature detection, undervoltage detection |
Wake-Up Pin | Y |
Min High Input Levels (V) [Vio] | 0.7 |
Number of pins | 14 |
Supported standards | CiA 601-4, ISO-11898-2:2016, SAE J2284-1, SAE J2284-2, SAE J2284-3, SAE J2284-4, SAE J2284-5 |
SPLIT Pin | N |
Thermal Resistance (Spec) (℃/W) | 74 |
Product Application | Automotive, Industrial |
环境
| 部件/12NC | 无铅 | 欧盟 RoHS | 无卤素 | RHF指标 | REACH SVHC | 重量（mg） |
|---|---|---|---|---|---|---|
TJA1463ATK/0Z(935389371431) | Yes | Yes Certificate Of Analysis (CoA) | Yes |  | REACH SVHC | 36.64 |
质量
| 部件/12NC | 安全保障功能安全 | 湿度灵敏度等级(MSL) | 封装体峰值温度（PPT）（C°） | Maximum Time at Peak Temperatures (s) | |||
|---|---|---|---|---|---|---|---|
| 无铅焊接 | 无铅焊接 | 无铅焊接 | |||||
TJA1463ATK/0Z (935389371431) | Quality Managed | 1 | 260 | 40 | |||
配送
| 部件/12NC | 协调关税 (美国)免责声明 |
|---|---|
TJA1463ATK/0Z (935389371431) | 854239 |
更多信息 TJA1463
The TJA1463 CAN signal improvement capability (SIC) transceiver with sleep mode is part of the TJA146x transceiver family that implements CAN SIC as defined in ISO 11898-2:2024 . By meeting the CAN physical layer as defined in ISO 11898-2:2024 and SAE J2284-(1-5), the TJA1463 is fully interoperable with high-speed classical CAN and CAN FD.
CAN signal improvement significantly reduces signal ringing on a network, allowing reliable CAN FD communication to function at 5 Mbit/s in larger topologies. In addition, the TJA1462 features a much tighter bit timing symmetry performance to enable CAN FD communication up to 8 Mbit/s.
The TJA1463 is backwards compatible and a drop-in replacement for classical CAN and CAN FD transceivers, such as NXPs TJA1043 and TJA1443.