Get Started with the NHS3100SENSORADK

NHS31XX Evaluation Kit: First Steps

Dear customer,
Thank you for evaluating the NHS31XX chip.

Preparing the Chip for Demonstration Purposes

1.1 Initial Firmware

The firmware loaded in the chip is the One-time NFC program downloader. To demonstrate the Temperature Logger, Therapy Adherence, or any other use case, the corresponding firmware image needs to be downloaded in the FLASH memory of the NHS31xx chip.

1.2 Procedure

Programming takes three steps:

1. Download and install the Android APP NHS31xx NFC Program Loader from the Google Play Store
2. Retrieve the latest version of the firmware you're interested in. All publicly available demo firmware from NXP can be downloaded in one zip container here: NHS31XX_DEMOS
3. Program the demo PCB by holding it in the NFC field of your NFC-enabled Android Phone for a prolonged time, until flashing is completed

Note: This can be carried out only once: when the new firmware is programmed, it is impossible to overwrite it wirelessly later. Changing firmware again is then only possible using a wired approach - see the next tab for instructions on how to do this.

1.3 Operation

Open the app NHS31xx NFC Program Loader on your phone. Download the demo container if not done already - a link is also available from within the app - and select the demo container from within the app. The app will read the contents and display the found demo firmware. Select the firmware corresponding to your demo PCB or label. Next tap the NFC antenna with your phone. Programming will start automatically. Keep the phone in a steady position to maintain the NFC connection until programming is complete.

Upon successful completion, the new firmware image will automatically start. The Demo PCB is now fully prepared, and you can use it for demonstration purposes immediately.

When programming fails - for example when the demo PCB or label is removed from the NFC field - you can simply try again. Only once programming has completely finished, wireless downloading of other firmware is no longer possible.