相关软件
快速参考恩智浦 软件类型.
1 软件文件
-
设计文件-其他
LPC860 PC accessory schematic and design files
注意: 推荐在电脑端下载软件，体验更佳。
PC Accessory SDRAM Module Controller Based on LPC860 MCUs
The SDRAM module controller reference design for PC accessory applications is based on two LPC860 MCUs, leveraging I3C interface for audio spectrum and temperature information transfer between controller and target. The controller uses FTM trigger ADC to sample the audio information and then implements FFT algorithm to get the spectrum information. After the calculation is finished, the spectrum information is transferred to the target through I3C interface, then the device will drive the led matrix to display spectrum information. At the same time, the target also detects temperature information and transfers it to the controller through the I3C.
产品详情
支持的器件
处理器和微控制器
LPC800 Arm Cortex-M0+
- LPC86X: LPC860: 基于Arm® Cortex®-M0+的低成本32位MCU，带有一个I3C接口
Features
- 2x LPC860 – one as leader, another as follower
- 1x USB power supply
- 3x LDO (5v to 3.3v/ 3.3v to 1v /5v to 1.8v)
- 1x OLED for music spectrum display, I3C speed and temperature and fans speed display
- 1x amplifier and 1x MIC for audio single detecting
- 16x32 WS2812s for music spectrum display
- 4xTMP sensors, detect the real time temperature (IO voltage 1.0v)
- 2x fans, controlled by follower FTM
- 1x EEPROM at follower side
