Features
Battery Cell Controller, Advanced, 6 Channels, TPL, LQFP48.
Package
HLQFP48 LQFP64, plastic, low profile quad flat package; 64 terminals; 0.5 mm pitch; 10 mm x 10 mm x 1.4 mm body.
购买选项
SC16C754BIA68,512
停产
12NC: 935274938512
详细信息
订购
SC16C754BIA68,518
停产
12NC: 935274938518
详细信息
订购
工作特点
| 参数 | 值 |
|---|---|
Channel | 4 |
Function | SC16C754B |
环境
| 部件/12NC | 无铅 | 欧盟 RoHS | 无卤素 | RHF指标 | REACH SVHC | 重量（mg） |
|---|---|---|---|---|---|---|
SC16C754BIA68,512(935274938512) | Yes | Yes | Yes |  | REACH SVHC | 4723.0 |
SC16C754BIA68,518(935274938518) | Yes | Yes | Yes | | REACH SVHC | 4723.0 |
质量
| 部件/12NC | 安全保障功能安全 | 湿度灵敏度等级(MSL) | 封装体峰值温度（PPT）（C°） | 适合 | MTBF | IR | ||
|---|---|---|---|---|---|---|---|---|
| 铅焊接 | 无铅焊接 | 铅焊接 | 无铅焊接 | |||||
SC16C754BIA68,512 (935274938512) | No | 3 | 3 | 225 | 245 | 2.0 | 5.0E8 | 0.0 |
SC16C754BIA68,518 (935274938518) | No | 3 | 3 | 225 | 245 | 2.0 | 5.0E8 | 0.0 |
配送
| 部件/12NC | 协调关税 (美国)免责声明 |
|---|---|
SC16C754BIA68,512 (935274938512) | 854231 |
SC16C754BIA68,518 (935274938518) | 854231 |
停产和更换部件数据
| 部件/12NC | 停产通知 | 上次购买日期 | 上次发货日期 |
|---|---|---|---|
SC16C754BIA68,512 (935274938512) | - | 2018-01-24 | 2018-07-24 |
SC16C754BIA68,518 (935274938518) | - | 2018-01-24 | 2018-07-24 |
更多信息 SC16C754B
The SC16C754B is a quad Universal Asynchronous Receiver/Transmitter (UART) with 64-byte FIFOs, automatic hardware/software flow control, and data rates up to 5 Mbit/s (3.3 V and 5 V). The SC16C754B offers enhanced features. It has a Transmission Control Register (TCR) that stores receiver FIFO threshold levels to start/stop transmission during hardware and software flow control. With the FIFO Ready (FIFO Rdy) register, the software gets the status of TXRDY/RXRDYfor all four ports in one access. On-chip status registers provide the user with error indications, operational status, and modem interface control. System interrupts may be tailored to meet user requirements. An internal loopback capability allows on-board diagnostics.
The UART transmits data, sent to it over the peripheral 8-bit bus, on the TX signal and receives characters on the RX signal. Characters can be programmed to be 5, 6, 7, or 8 bits. The UART has a 64-byte receive FIFO and transmit FIFO and can be programmed to interrupt at different trigger levels. The UART generates its own desired baud rate based upon a programmable divisor and its input clock. It can transmit even, odd, or no parity and 1, 1.5, or 2 stop bits. The receiver can detect break, idle, or framing errors, FIFO overflow, and parity errors. The transmitter can detect FIFO underflow. The UART also contains a software interface for modem control operations, and has software flow control and hardware flow control capabilities.
The SC16C754B is available in plastic LQFP64, LQFP80 and PLCC68 packages.