Features
Battery Cell Controller, Advanced, 6 Channels, TPL, LQFP48.
Package
HLQFP48 LQFP64, plastic, low profile quad flat package; 64 terminals; 0.5 mm pitch; 10 mm x 10 mm x 1.4 mm body.
购买选项
P82B96TD,118
正常供应
12NC: 935262295118
详细信息
数量
单价
| 1 - 24 | $2.31 |
| 25 - 25 | $2.31 |
| 26 - 99 | $2.31 |
| 100+ | $2.31 |
订购
现货:2,475
从分销商处购买P82B96TD/S900,118
正常供应
12NC: 935288268118
详细信息
数量
单价
| 1 - 24 | $2.42 |
| 25 - 25 | $2.42 |
| 26 - 99 | $2.42 |
| 100+ | $2.42 |
订购
现货:2,462
从分销商处购买P82B96TD,112
使用寿命终止
12NC: 935262295112
详细信息
订购
工作特点
| 参数 | 值 |
|---|---|
Ambient Operating Temperature (Min to Max) (℃) | -40 to 85 |
Supply Voltage [Min to Max] (V) | 2 to 15 |
环境
| 部件/12NC | 无铅 | 欧盟 RoHS | 无卤素 | RHF指标 | REACH SVHC | 重量（mg） |
|---|---|---|---|---|---|---|
P82B96TD,112(935262295112) | Yes | Yes Certificate Of Analysis (CoA) | Yes |  | REACH SVHC | 69.0 |
P82B96TD,118(935262295118) | Yes | Yes Certificate Of Analysis (CoA) | Yes | | REACH SVHC | 69.0 |
P82B96TD/S900,118(935288268118) | Yes | Yes Certificate Of Analysis (CoA) | Yes | | REACH SVHC | 69.50900000000001 |
质量
| 部件/12NC | 安全保障功能安全 | 湿度灵敏度等级(MSL) | 封装体峰值温度（PPT）（C°） | 适合 | MTBF | IR | ||
|---|---|---|---|---|---|---|---|---|
| 铅焊接 | 无铅焊接 | 铅焊接 | 无铅焊接 | |||||
P82B96TD,112 (935262295112) | No | 1 | 1 | 240 | 260 | 2.0 | 5.0E8 | 0.0 |
P82B96TD,118 (935262295118) | No | 1 | 1 | 240 | 260 | 2.0 | 5.0E8 | 0.0 |
P82B96TD/S900,118 (935288268118) | No | 1 | 1 | 240 | 260 | 2.0 | 5.0E8 | 0.0 |
配送
| 部件/12NC | 协调关税 (美国)免责声明 |
|---|---|
P82B96TD,112 (935262295112) | 854239 |
P82B96TD,118 (935262295118) | 854239 |
P82B96TD/S900,118 (935288268118) | 854239 |
更多信息 P82B96
The P82B96 is a bipolar IC that creates a non-latching, bidirectional, logic interface between the normal IC-bus and a range of other bus configurations. It can interface IC-bus logic signals to similar buses having different voltage and current levels.
For example, it can interface to the 350 A SMBus, to 3.3 V logic devices, and to 15 V levels and/or low-impedance lines to improve noise immunity on longer bus lengths.
It achieves this interface without any restrictions on the normal IC-bus protocols or clock speed. The IC adds minimal loading to the IC-bus node, and loadings of the new bus or remote IC-bus nodes are not transmitted or transformed to the local node. Restrictions on the number of IC-bus devices in a system, or the physical separation between them, are virtually eliminated. Transmitting SDA and SCL signals via balanced transmission lines (twisted pairs) or with galvanic isolation (opto-coupling) is simple because separate directional Tx and Rx signals are provided. The Tx and Rx signals may be directly connected, without causing latching, to provide an alternative bidirectional signal line with IC-bus properties.