Features
Battery Cell Controller, Advanced, 6 Channels, TPL, LQFP48.
Package
HLQFP48 LQFP64, plastic, low profile quad flat package; 64 terminals; 0.5 mm pitch; 10 mm x 10 mm x 1.4 mm body.
封装
LQFP100: LQFP100, plastic low profile quad flat package; 100 leads; 0.5 mm pitch, 14 mm x 14 mm x 1.4 mm body
购买选项
LPC1548JBD100E
正常供应
12NC: 935302467551
详细信息
订购
工作特点
| 参数 | 值 |
|---|---|
Core Type | Arm Cortex-M3 |
Operating Frequency [Max] (MHz) | 72 |
Flash (kB) | 128 |
SRAM (kB) | 20 |
EEPROM (kB) | 4 |
Serial Communication | 1 x I²C, 2 x SPI, 3 x UART |
CAN | 1 |
| 参数 | 值 |
|---|---|
USB Controllers | 1 |
Timers [Number, bits] | 4 x 16, 4 x 32 |
PWM [Number, bits] | 28 x 16 |
ADC [Number, bits] | 2 x 12 |
GPIO | 76 |
Supply Voltage [Min to Max] (V) | 2.4 to 3.6 |
Ambient Operating Temperature (Min to Max) (℃) | -40 to 105 |
环境
| 部件/12NC | 无铅 | 欧盟 RoHS | 无卤素 | RHF指标 | REACH SVHC | 重量（mg） |
|---|---|---|---|---|---|---|
LPC1548JBD100E(935302467551) | Yes | Yes Certificate Of Analysis (CoA) | Yes |  | REACH SVHC | 692.5435205599999 |
质量
| 部件/12NC | 安全保障功能安全 | 湿度灵敏度等级(MSL) | 封装体峰值温度（PPT）（C°） | ||
|---|---|---|---|---|---|
| 铅焊接 | 无铅焊接 | 铅焊接 | 无铅焊接 | ||
LPC1548JBD100E (935302467551) | No | 2 | 2 | 240 | 260 |
配送
| 部件/12NC | 协调关税 (美国)免责声明 | 出口控制分类编号 (美国) |
|---|---|---|
LPC1548JBD100E (935302467551) | 854231 | 3A991A2 |
产品变更通知
| 部件/12NC | 发行日期 | 生效日期 | 产品更改通知 | 标题 |
|---|---|---|---|---|
LPC1548JBD100E (935302467551) | 2022-06-01 | 2022-09-05 | 202205023I | Standardize the LQFP 14x14x1.4 tray and the 5+1 Tray Dry-Pack Packing Method |
LPC1548JBD100E (935302467551) | 2020-12-15 | 2020-12-16 | 202011011I | NXP Will Add a Sealed Date to the Product Label |
LPC1548JBD100E (935302467551) | 2018-02-02 | 2018-02-12 | 201801029I | Changing Packing Trays for Products in 14x14 and 20x20 (H)LQFP Packages. |
更多信息 LPC1548JBD100
The LPC1500 microcontroller series are optimized for fast, easy, and high-precision motor control and incorporate all the features required for high-accuracy sensored and sensorless motor control, enabling simultaneous control of two motors in highly flexible configurations. Based on the Arm® Cortex™-M3 processor, the LPC1500 microcontroller series has two 12-bit, 12-channel, 2 Msps ADCs and an on-chip quadrature encoder interface (QEI) to enable highly accurate control of both sensored and sensorless motor combinations. Four on-chip comparators enable fast-response over-current/voltage monitoring and protection; and four flexible SCTimer/PWM timers provide up to 28 PWM channels in a tightly coupled analog and timing subsystem, with minimal load on the CPU. Ideal for use with a wide range of brushless DC (BLDC) motors, permanent-magnet synchronous motors (PMSM), and AC induction motors (ACIM) commonly found in products such as large home appliances, HVAC, industrial pumps and generators, and more. They are also well suited for industrial applications requiring high-precision data sampling and real-time control, such as digital power and instrumentation. The LPC1500 series of microcontrollers are fully supported by the LPC software ecosystem and an extensive collection of tools, drivers and middleware.
With ultra-efficient motor control firmware, easy-to-use GUI-based tuning tools, and two new motor control solution kits, NXP LPC1500 microcontrollers simplify evaluation and development of motor control applications, without requiring deep motor control experience.