-
DSC-MULTILINK
-
DSC Multilink.
DSC Multilink
PEmicro’s DSC Multilink is a debug interface which accelerates the debug and flash programming process, saving valuable development time. The Multilink provides access to the debug modes of NXP’s DSC MCUs by allowing communications between the target device and a laptop / PC. The Multilink connects the target’s standard debug header to the laptop / PC’s USB port.
- The DSC Multilink’s speed, reliability, and price make it ideal for rapid, cost-effective development
- DSC Multilink debug probes are natively supported by recent versions of CodeWarrior®
- Currently, CodeWarrior(r) 11.2 only supports MC56F80xxx. All the other DSC families are still using CodeWarrior(r) 11.1
产品详情
支持的器件
处理器和微控制器
32位56F8xxxx系列
- MC56F82xxx: MC56F82xxx: MC56F826xx和MC56F827xx数字信号控制器
- MC56F83xxx: 性能级数字信号控制器, USB FS OTG, CAN-FD
- MC56F84xxx: 数字信号控制器
- MC56F81xxx: 高达100MHz的数字信号控制器，带DSASS和运算放大器
- MC56F80xxx: 带集成FPU和三角数学引擎的DSC，带OPAMP和正交解码器
Features
Power Management
- Multivoltage support for targets ranging from 1.8 to 5 volts
Connectivity
- Fast, hassle-free USB 2.0 communications interface
- Type A to Type B male-to-male USB cable connects the interface to PC
Debug
- Debugging via NXP Codewarrior for Microcontrollers
General
- Includes a 14-pin ribbon cable for connection to DSC target debug headers
- Supports Program and Data Flash, Securing and Unsecuring
购买选项
