Features
Battery Cell Controller, Advanced, 6 Channels, TPL, LQFP48.
Package
HLQFP48 LQFP64, plastic, low profile quad flat package; 64 terminals; 0.5 mm pitch; 10 mm x 10 mm x 1.4 mm body.
购买选项
UJA1162TK,118
使用寿命终止
12NC: 935294612118
详细信息
订购
工作特点
| 参数 | 值 |
|---|---|
Additional Features | Sleep Mode, Standby Mode |
Junction Temperature (Min) (℃) | -40 |
Recommended Version | UJA1162TK |
VESD HBM on bus pins (+/- kV) | 8 |
Additional Features - Power Management | Sleep Mode, Standby Mode |
Memory Protection | Sleep Mode, Standby Mode |
Thermal Resistance (Spec) (℃/W) | 60 |
Tvj [max] | -40~150 |
Over-temperature detection | Yes |
Buffer | CAN FD / High-Speed CAN |
SPLIT pin | No |
CAN channels | 1 |
LIN channels | 0 |
Protection | TXD dominant timeout, overtemperature, undervoltage detection |
Description | Self-supplied high-speed CAN transceiver with Sleep mode |
FlexRay Channels | 0 |
Supply Voltage [Min - Max] | 4.5, 28 |
Voltage on bus pins [min] | -58 |
countdown timer | Yes |
Voltage on bus pins [max] | 58 |
TX Dominant Time out | Yes |
Low power modes | Standby Mode; Sleep Mode |
VESD IEC61000-4-2 (kV) | 6 |
stop-watch mode | Standby Mode; Sleep Mode |
CAN | 1 |
Product category | SBC; High-Speed CAN; CAN FD; Mini SBC |
Supply voltage [min] (V) | 3 |
Supply voltage [max] (V) | 40 |
Supply Voltage [max] (V) | 28 |
Supply Voltage [min] (V) | 4.5 |
Low Power Modes | Sleep Mode, Standby Mode |
Peripherals | CAN, FlexRay, LIN |
PHY | CAN, LIN |
Supply Voltage [Min to Max] (V) | 4.5 to 28 |
Supported standards | ISO-11898-2; ISO-11898-5; ISO-11898-6 |
Peripheral Type | CAN, FlexRay, LIN |
Data rate (Mbps) | 15 |
Max Data Rate per Lane (Gbps) | 2000000 |
Recommended Superset | UJA1162TK,118 |
Data rate [min] (kb/s) | 15 |
RF driver supply [max] (V) | 40 |
Data rate [max] (kb/s) | 2000 |
RF driver supply [min] (V) | 3 |
Rth(j-a) (K/W) | 60 |
Core | CAN FD / High-Speed CAN |
| 参数 | 值 |
|---|---|
Data Rate [max] kbps | 2000.0 |
Serial Communication | 0 x FlexRay |
Wake-Up Pin | Y |
Voltage on bus pins [Min-Max] (V) | -58 to 58 |
CAN Channels | 1 |
VESD HBM on bus pins (+/- kV) | 0 to 0 |
Number of pins | 14 |
Package Style | HVSON |
Peripheral Type | CAN, FlexRay, LIN |
Host interface protocol | Sleep Mode, Standby Mode |
eTSEC | 1 |
TDM | 1 |
Number of LIN Channels | 0 |
J1850 | 1 |
Protection & Diagnosis | TXD dominant timeout, overtemperature, undervoltage detection |
SLIC | 1 |
Tvj [max] (℃) | 150 |
Security Status | COMPANY PUBLIC |
INH / Wake Pin | Yes |
Min High Input Levels (V) | 0.75 x Vio |
Flexray | 0 |
Memory / Peripheral Protection | Sleep Mode, Standby Mode |
Operating Voltage [Min to Max] (V) | 4.5 to 28 |
New Generation Recommendation | UJA1162ATK |
Recommended Orderable Part Number | UJA1162TK,118 |
CAN Bus Robustness [Min-Max] (V) | -58 to 58 |
Rth(j-a) (K/W) | 60 |
Interfaces | Interfaces, Interfaces, Interfaces |
Application | Automotive; Industrial |
Under-voltage detection | Yes |
Communication | UJA1162ATK |
Pad supply (V) | 4.5 to 28 |
Junction Temperature (Max) (℃) | 150 |
Junction Temperature (Min to Max) (℃) | -40 to 150 |
Communication protocol | CAN, FlexRay, LIN |
VIO option available | Yes |
Security Features | Sleep Mode, Standby Mode |
VESD IEC61000-4-2 (kV) | 6 |
Master Interface | CAN, FlexRay, LIN |
Product Category | CAN FD / High-Speed CAN |
Controller Interface | CAN, FlexRay, LIN |
Category | SBC; CAN |
Data Rate (Max) (Kbps) | 2000.0 |
Additional Features - Analog | Sleep Mode, Standby Mode |
环境
| 部件/12NC | 无铅 | 欧盟 RoHS | 无卤素 | RHF指标 | REACH SVHC | 重量（mg） |
|---|---|---|---|---|---|---|
UJA1162TK,118(935294612118) | Yes | Yes Certificate Of Analysis (CoA) | Yes |  | REACH SVHC | 39.9457470816 |
质量
| 部件/12NC | 安全保障功能安全 | 湿度灵敏度等级(MSL) | 封装体峰值温度（PPT）（C°） | ||
|---|---|---|---|---|---|
| 铅焊接 | 无铅焊接 | 铅焊接 | 无铅焊接 | ||
UJA1162TK,118 (935294612118) | Quality Managed | 1 | 1 | 240 | 260 |
配送
| 部件/12NC | 协调关税 (美国)免责声明 |
|---|---|
UJA1162TK,118 (935294612118) | 854239 |
更多信息 UJA1162TK
The UJA1162 is a ‘self-supplied’ high-speed CAN transceiver integrating an ISO 11898-2/5 compliant HS-CAN transceiver and an internal 5 V CAN supply. The only supply input is a battery connection. The UJA1162 can be operated in a very low-current Sleep mode with local and bus wake-up capability.
The UJA1162 implements the standard CAN physical layer as defined in the current ISO11898 standard (-2 and -5). Pending the release of the updated version of ISO11898 including CAN FD, additional timing parameters defining loop delay symmetry are included. This implementation enables reliable communication in the CAN FD fast phase at data rates up to 2 Mbit/s.